k-torc.com >> Products >> Limit Switch Box >> ALS-500 Series >> Text  
  ALS-500MS Control Station
ALS-500 Series - ALS-500MS Control Station

ACS series control station which we have developed is an optimizing solution to control and feedback the position of actuator and valve. In this control station, the coil and wires of solenoid are installed inside of the limit switch box which is weather protected in standard of IP67 or is explosion proof protected in standard of Exd II BT6 or Exd II CT6. The value for money and the cycle life of the monitor is higher comparing with traditional solution.


1, Compact and Beautiful Design, Polyester powder coated aluminum die-casting housing and hard anodized body of solenoid valve.

2, Higher level weather proof (IP67) and/or explosion proof (ExdIIBT6 or ExdIICT6) both for solenoid valve and limit switch box in same time.

3, Lower watt for solenoid coil (1.2W or 1.6VA)

4, Simple wiring, the wiring of coil of solenoid valve and microswitch is inside of the box where have multipoint terminal strip, standard 8 points and enough strips for connection (14 points for optional).

5, Multiview visual Position Indicator, Secure waterproof, multi-angles visual valve positions involving top and side view.

6, "Quick-Set" Cam, spring loaded splined cam. no need to adjust again after initial setting and easy setting without tool.

7, Captive cover bolts, No worry to loose bolts while cover opens

8, Easy mounting, NAMUR and ISO5211 adjustable bracket same as for 30*80-130 H20-30. standard is steel plate and stainless steel (optional)




Structure and Material



Wiring Diagram

ISO Mounting Bracket


  • Previous: ALS-500 Series - None

  • Next: ALS-500 Series - ALS-500P Limit Switch Box (Proximity Sensor)
  • [Close]
    Copyright© Kempe Engineering Pty Ltd
    Head Office: 50 Gheringhap St, Geelong, Victoria, Australia 3220